Alcatel-Lucent 7750 SR OS - Page 263

Interface Configuration
7750 SR OS Interface Configuration Guide Page 263
named-pool-mode
Syntax named-pool-mode
Context config>card>mda
config>port
Description The named-pool-mode CLI context is used to store the MDA and port level named pool mode
configuration commands. Currently, only the ingress and egress named-pool-policy commands are
supported. Any future named pool mode configuration commands or overrides will be placed in the
named-pool-mode CLI context. Within the context is an ingress and egress context.
Enter the named-pool-mode to define the ingress and egress named pool policy associations for either
an MDA or port. The node may be entered regardless of the current named-pool-mode state of the
IOM.