Alcatel-Lucent 7750 SR OS - Page 215

Interface Configuration
7750 SR OS Interface Configuration Guide Page 215
A:7710-3>
A:7710-3>config# show mda 1/7 detail
===============================================================================
MDA 1/7 detail
===============================================================================
Slot Mda Provisioned Equipped Admin Operational
Mda-type Mda-type State State
-------------------------------------------------------------------------------
7 c8-chds1 c8-chds1 up up
MDA Specific Data
Maximum port count : 8
Number of ports equipped : 8
Network ingress queue policy : default
Capabilities : TDM, PPP, FR
Min channel size : PDH DS0 Group
Max channel size : PDH DS1
Max number of channels : 64
Channels in use : 0
Hardware Data
Part number : Sim Part#
CLEI code : Sim CLEI
Serial number : mda-7
Manufacture date : 01012003
Manufacturing string : Sim MfgString mda-7
Manufacturing deviations : Sim MfgDeviation mda-7
Administrative state : up
Operational state : up
Temperature : 35C
Temperature threshold : 75C
Time of last boot : 2006/10/02 09:28:22
Current alarm state : alarm cleared
Base MAC address : 04:7b:01:07:00:01
===============================================================================
A:7710-3>
In the TDM E1 context, configure DS0 channel groups and their parameters. For a DS1 channel-
group, up to 24 timeslots can be assigned (numbered 1..24). For an E1 channel-group, up to 31
timeslots can be assigned (numbered 2..32). For ATM, all timeslots are auto-configured when a
channel group gets created (there is no sub-E1 for ATM). ATM, Frame Relay and BCP-NULL
encapsulation examples follow:
ALA-A>config>port>tdm# e1 1.1
ALA-A>config>port>tdm>e1# channel-group 1
ALA-A>config>port>tdm>e1>channel-group# timeslots 2
ALA-A>config>port>tdm>e1>channel-group# no shutdown
ALA-A>config>port>tdm>e1>channel-group#
ALA-A>config>port>tdm>e1# no shutdown
ALA-A>config>port>tdm>e1# channel-group 2
ALA-A>config>port>tdm>e1>channel-group# timeslots 3
ALA-A>config>port>tdm>e1>channel-group# encap-type frame-relay
ALA-A>config>port>tdm>e1>channel-group# no shutdown
ALA-A>config>port>tdm>e1>channel-group# exit
ALA-A>config>port>tdm>e1# channel-group 3
ALA-A>config>port>tdm>e1>channel-group# timeslots 11,12
ALA-A>config>port>tdm>e1>channel-group# encap-type cisco-hdlc