Alcatel-Lucent 7750 SR OS - Page 303

Interface Configuration
7750 SR OS Interface Configuration Guide Page 303
n393
Syntax n393 [2..10]
no n393
Context config>port>ethernet>elmi
Description This command configures the monitored count of consecutive errors.
Parameters 2 .. 10 — Specifies the monitored count of consecutive errors.
t391
Syntax t391 [5..30]
no t391
Context config>port>ethernet>elmi
Description This command configures the polling timer for UNI-C.
Parameters 5 ..30 — Specifies the polling timer for UNI-C.
t392
Syntax t392 [5..30]
no t392
Context config>port>ethernet>elmi
Description This command configures the polling verification timer for UNI-N.
Parameters 5 .. 30 — Specifies the polling verification timer for UNI-N.
mode
Syntax mode {access | network | hybrid}
no mode
Context config>port>ethernet
config>port>sonet-sdh>path
config>port>tdm>ds1>channel-group
config>port>tdm>ds3
config>port>tdm>e1>channel-group
config>port>tdm>e3
Description This command configures an Ethernet port, TDM channel, or SONET/SDH path (sub-port) for
access, network or hybrid mode operation.