Interface Configuration
7750 SR OS Interface Configuration Guide Page 323
agg-rate-limit
Syntax agg-rate-limit kilobits-per-second [queue-frame-based-accounting]
no agg-rate-limit
Context config>port>ethernet>access>egr>qgrp
config>port>ethernet>access>ing>qgrp
config>port>ethernet>network>egr>qgrp
Description This command defines the maximum total rate of all egress queues in this queue-group.
If a port scheduler is not defined on the egress port, the queues are allowed to operate based on their
own bandwidth parameters.
The no form of the command removes the aggregate rate limit from theconfiguration.
Parameters agg-rate — Defines the rate, in kilobits-per-second, that the maximum aggregate rate the queues on
the port can operate.
Values 1 — 40000000, max
queue-frame-based-accounting — This keyword enables frame based accounting on all queues
associated with the port. If frame based accounting is required when an aggregate limit is not
necessary, the max keyword should precede the queue-frame-based-accounting keyword. If frame
based accounting must be disabled, execute agg-rate-limit without the queue-frame-based-accounting
keyword present.
host-match
Syntax host-match dest destination-string [create]
no host-match dest destination-string
Context config>port>ethernet>access>egr>qgrp
Description This command configures host matching for the Ethernet port egress queue-group.
The no form of the command removes
Parameters dest destination-string — Specify a host match destination string up to 32 characters in length.
create — Keyword used to create the host match. The create keyword requirement can be enabled/
disabled in the environment>create context.
queue-overrides
Syntax queue-overrides
Context config>port>ethernet>access>egr>qgrp
config>port>ethernet>access>ing>qgrp
config>port>ethernet>network>egr>qgrp
To Next Page
Loading...
