Configuration Commands
Page 390 7750 SR OS Interface Configuration Guide
test-frequency seconds — Specifies the frequency for testing for connectivity when the link is
establishing before polling begins.
Values 0 — 255
protocol
Syntax protocol protocol-type
no protocol
Context config>port>sonet-sdh>path>atm>ilmi
Description This command configures the protocol.
Parameters protocol-type — The protocol-type is an enumerated integer whose value indicates the ILMI version
of either 3.1 or 4.0 that is advertised by IME and also indicates the ILMI IME type of either user-
side or network-side.
Values 4_0-user, 4_0-network. 3_1-user, 3_1-network
To Next Page
Loading...
