Alcatel-Lucent 7750 SR OS - Page 392

Configuration Commands
Page 392 7750 SR OS Interface Configuration Guide
Description This command enables the context to configure the egress QoS profile for an MLFR bundle or a
Frame Relay port with FRF.12 UNI/NNI fragmentation enabled.
qos-profile
Syntax qos-profile profile-id
no qos-profile
Context config>port>tdm>channel-group>frame-relay>egress
config>port>sonet-sdh>path>frame-relay>egress
Description This command specifies the ingress or egress QoS profile to be used for the configuration of the
egress QoS parameters of a Frame Relay port with FRF.12 UNI/NNI fragmentation enabled.
The no form of the command removes the parameters from the configuration.
Parameters profile-id — Specifies the profile number. The value can only be modified if the FR port is shut
down.
Values 1-128
fragment-threshold
Syntax fragment-threshold fragment-threshold
no fragment-threshold
Context config>port>tdm>channel-group>frame-relay>frf.12
config>port>sonet-sdh>path>frame-relay>frf.12
Description This command sets the maximum length in bytes of a fragment transmitted across a frame relay port
with the FRF.12 UNI/NNI fragmentation enabled.
The no form of this command resets the fragment threshold back to the default value.
Default 128
Parameters fragment-threshold — Specifies the maximum fragment length, in bytes, to be transmitted across the
FRF.12 port.
Values 128-512 bytes
identifier
Syntax [no] identifier frf16-link-id-string
Context config>port>tdm>ds1>channel-group>frame-relay
Description This command defines the identifier for the FR bundle when used in an MLFR bundle. The no form
of this command resets the value to null.