Configuration Commands
Page 430 7750 SR OS Interface Configuration Guide
Values 0 — 11840
mac-address
Syntax mac-address mac-address
no mac-address
Context config>eth-ring>path>eth-cfm>mep
Description This command specifies the MAC address of the MEP.
The no form of this command reverts the MAC address of the MEP back to that of the port (if the
MEP is on a SAP) or the bridge (if the MEP is on a spoke SDP).
Parameters mac-address — Specifies the MAC address of the MEP.
Values 6-byte unicast mac-address (xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx) of the MEP.
Using the all zeros address is equivalent to the no form of this command.
one-way-delay-threshold
Syntax one-way-delay-threshold time
Context config>eth-ring>path>eth-cfm>mep
Description This command enables one way delay threshold time limit.
Default 3 seconds
Parameters priority — Specifies the value for the threshold.
Values 0 — 600
shutdown
Syntax [no] shutdown
Context config>eth-ring>path>eth-cfm>mep
Description This command administratively enables/disables the MEP.
The no form of this command disables/enables the MEP.
Default shutdown
To Next Page
Loading...
