Alcatel-Lucent 7750 SR OS - Page 476

Show Commands
Page 476 7750 SR OS Interface Configuration Guide
card
Syntax card [slot-number] [detail]
card state
Context show
Description This command displays card information.
If no command line parameters are specified, a card summary for all cards is displayed.
Parameters slot-number — Displays information for the specified card slot.
Default Displays all cards.
Values Depending on the chassis model, IOM slots can be numbered from 1 - 10
SF/CPM slots are A, B (upper or lowercase)
state — Displays provisioned and equipped card and MDA information.
detail — Displays detailed card information.
Default Displays summary information only.
Output Show Card Output — The following table describes show card output fields.
Sample Output
A:ALU-48# show card
===============================================================================
Card Summary
===============================================================================
Slot Provisioned Equipped Admin Operational
Card-type Card-type State State
-------------------------------------------------------------------------------
1 iom3-xp iom3-xp up up
2 iom3-xp iom3-xp up up
Label Description
Slot
The slot number of the card in the chassis.
Provisioned
Card-type
The card type that is configured for the slot.
Equipped Card-
type
The card type that is actually populated in the slot.
Admin State
Up — The card is administratively up.
Down — The card is administratively down.
Operational
State
Up — The card is operationally up.
Down — The card is operationally down.