Interface Configuration
7750 SR OS Interface Configuration Guide Page 515
Unknown Proto
Discards Input/
Output
For packet-oriented interfaces, the number of packets received through
the interface which were discarded because of an unknown or unsup-
ported protocol. For character-oriented or fixed-length interfaces that
support protocol multiplexing the number of transmission units
received via the interface which were discarded because of an
unknown or unsupported protocol. For any interface that does not sup-
port protocol multiplexing, this counter will always be 0. For ATM,
this field displays cells discarded on an invalid vpi/vci. Unknown proto
discards do not show up in the packet counts.
Errors
This field displays the number of cells discarded due to uncorrectable
HEC errors. Errors do not show up in the raw cell counts.
Sync. Status Msg
Whether synchronization status messages are enabled or disabled.
Tx DUS/DNU
Whether the QL value is forcibly set to QL-DUS/QL-DNU.
Rx Quality Level
Indicates which QL value has been received from the interface.
Tx Quality Level
Indicates which QL value is being transmitted out of the interface.
SSM Code Type
Indicates the SSM code type in use on the port.
Label Description (Continued)
To Next Page
Loading...
