Alcatel-Lucent 7750 SR OS - Page 569

Interface Configuration
7750 SR OS Interface Configuration Guide Page 569
Multilink Bundle Commands
multilink-bundle
Syntax multilink-bundle [bundle-id | slot/mda | type {mlppp | ima-grp | mlfr}] [detail]
multilink-bundle {bundle-id | slot/mda} [ppp | ima | mlfr]
multilink-bundle bundle-id relations
multilink-bundle bundle-id ppp [multiclass]multilink-bundle bundle-id mlfr [frame-relay
[detail]]
Context show
Description This comand displays multilink bundle information. An operator can display:
• All bundles on the system/MDA or all bundles of a given type on the system by specifying
the value of type filter to be either mlppp, mlfr or ima-grp.
• Bundle specific information in summary (no detail option) or detailed format (detail option
specified) for one or more bundles
• Protocol specific information (example PPP or IMA) for the specified bundle
• ATM interface information for IMA groups see show port atm command for more details
Parameters bundle-id — Specifies the multilink (PPP, MLFR or IMA) bundle to be associated with this IP
interface. The command syntax must be used as follows:
Syntax: bundle-type-slot/mda.bundle-num
bpgrp-type-bpgrp-num
bundle-ppp-slot/mda.bundle-num (Creates a multilink PPP bundle.)
bundle-ima-slot/mda.bundle-num (Creates an IMA group bundle.)
bundle-r-slot/mda.bundle-num (Creates an MLFR group bundle.)
bundle: keyword
slot: IOM/MDA slot numbers
bundle-num: 1 — 128
ppp — Displays PPP bundle information.
ima, ima-grp — Displays IMA-type groups.
mlfr — Displays bundle MLFR information, or used to display MLFR-type groups.
mlppp — Display MLPPP-type groups.
detail —
Provides detailed information.
relations — Displays the working and protection bundles associated with this bundle-id.
Multilink Bundle Output — The following table describes multilink bundle output fields.
Multilink Bundle Output Fields