Show Commands
Page 576 7750 SR OS Interface Configuration Guide
Flags : None
Multi Svc Site : None
Last Status Change : 12/02/2008 20:48:12
Last Mgmt Change : 12/02/2008 20:46:36
Sub Type : regular
Split Horizon Group: (Not Specified)
Admin MTU : 9194 Oper MTU : 9194
Ingr IP Fltr-Id : n/a Egr IP Fltr-Id : n/a
Ingr Mac Fltr-Id : n/a Egr Mac Fltr-Id : n/a
Ingr IPv6 Fltr-Id : n/a Egr IPv6 Fltr-Id : n/a
tod-suite : None qinq-pbit-marking : both
Ing Agg Rate Limit : max Egr Agg Rate Limit: max
FRF-12 (ETE) : Enabled Ete-Frag-Threshold: 128
Scheduling Class : 3
Acct. Pol : None Collect Stats :
Disabled
Anti Spoofing : None Avl Static Hosts : 0
Tot Static Hosts : 0
Calling-Station-Id : n/a
Application Profile: None
---------------------------------------------------------------------------
relations
Syntax relations
Context show>multilink-bundle
Description This command displays the working and protection bundles associated with this bundle-id.
Output Show Mutlilink-Bundle Relations Output — The following table describes show multilink-
bundle relations output fields.
Label Description
BundleID Displays the bundle number.
Admin State Up — The bundle is administratively up.
Down — The bundle is administratively down.
Oper State Up — The bundle is operationally up.
Down — The bundle is operationally down.
Working BundleID Displays the bundle that is currently in working mode.
To Next Page
Loading...
