Show Commands
Page 578 7750 SR OS Interface Configuration Guide
Sample Output
A:timetra-sim110# show multilink-bundle bundle-ima-1/1.2
===============================================================================
Bundle Summary
===============================================================================
Bundle Type Admin Oper Port Min Total/
Id State State State Links Active Links
-------------------------------------------------------------------------------
bundle-ima-1/1.2 ima Down Down Link Up 1 1/0
-------------------------------------------------------------------------------
Bundles : 1
===============================================================================
A:timetra-sim110#
A:timetra-sim110# show multilink-bundle bundle-ima-1/1.2 detail
===============================================================================
Bundle bundle-ima-1/1.2 Detail
===============================================================================
Description : MultiLink Bundle
Bundle Id : bundle-ima-1/1.2 Type : ima
Admin Status : down Oper Status : down
Minimum Links : 1 Bundle IfIndex : 555749378
Total Links : 1 Active Links : 0
Red Diff Delay : 25 Yellow Diff Delay : N/A
Red Diff Delay Act : down MRRU : N/A
Short Sequence : N/A Oper MRRU : N/A
Oper MTU : 1524 Fragment Threshold : 128 bytes
Port State
Displays the state level of the port.
none — Indicates that the port is either in its initial creation state or
is just about to to be deleted.
ghost — No member links are configured as part of this bundle.
down — All member links are in “none”, “ghost”, or “down” state.
linkUp — At least one member link is in port state “link up” but the
bundle protocol is not yet operationally up (due to bundle protocol still
coming up. For example, due to insufficient number of member links
in “link up” state yet or to bundle being shut down.
Up — Indicates that the bundle is ready to pass some kinds of traffic
as the bundle protocol has come up (at least “minimum links” member
links are in the port state up and the bundle protocol is up.)
Min Links
Minimum Links
Displays the minimum number of links that must be active for a bundle
to be active. If the number of links drop below the given minimum
then the multilink bundle will transition to an operation down state.)
Total/Active
Links
Displays the total number of active links for the bundle.
Label Description (Continued)
To Next Page
Loading...
