Alcatel-Lucent 7750 SR OS - Page 612

Tools Commands
Page 612 7750 SR OS Interface Configuration Guide
Link protocol state : Up
Diff delay state : OK
Smoothed diff delay : 0 ms.
Historical RTT : 2248, 2242, 2309 us.
Rx LinkId : "1/1/1.1.4.1"
LIP CTL Messages : Tx: 14 Rx: 13
Hello Messages : Tx: 8 Rx: 1
Hello Ack Messages : Tx: 1 Rx: 8
AddLink Messages : Tx: 3 Rx: 1
AddLinkAck Messages : Tx: 1 Rx: 2
AddLinkRej Messages : Tx: 0 Rx: 0
lag
Syntax lag lag-id lag-id
Context tools>dump
Description This command dumps LAG information.
Parameters lag-id — Specifies the LAG ID.
Values 1..200
map-to-phy-port
Syntax map-to-phy-port {ccag ccag-id | lag lag-id | eth-tunnel tunnel-index} {isid isid [end-isid
isid] | service service-id | svc-name [end-service service-id | svc-name]} [summary]
Context tools>dump
Description This command provides the ability to respond to a query to provide the link in a LAG/Ethernet
tunnel (loadsharing protection mode)/CCAG that is currently assigned to a given service-id or ISID.
Parameters lag-id — Specifies the LAG ID.
Values 1..200
isid — Specifies the ISID.
Values 0..16777215
service-id — Specifies the service ID.
Values 1..2147483648, 64 char max
tunnel-index — Specifies the tunnel index.
Values 1..1024
ccag-id — Specifies the CCAG ID.
Values 1..8