Tools Commands
Page 614 7750 SR OS Interface Configuration Guide
Context tools>dump
Description This command enables the context to dump redundancy parameters.
multi-chassis
Syntax multi-chassis
Context tools>dump>redundancy
Description This command enables the context to dump multi-chassis parameters.
mc-ring
Syntax mc-ring
Context tools>dump>redundancy>multi-chassis
Description This command dumps multi-chassis ring data.
sync-database
Syntax sync-database [peer ip-address] [port port-id | lag-id] [sync-tag sync-tag] [application
{dhcps | igmp | igmp-snooping | srrp | sub-mgmt | mld-snooping | mc-ring}] [detail]
[type {alarm-deleted | local-deleted}]
Context tools>dump>redundancy>multi-chassis
Description This command dumps multi-chassis sync database information.
Parameters peer ip-address — Dumps the specified address of the multi-chassis peer.
port port-id — Dumps the specified port ID of the multi-chassis peer.
port lag-id — Dumps the specified Link Aggregation Group (LAG) on this system.
sync-tag sync-tag — Dumps the synchronization tag used while synchronizing this port with the
multi-chassis peer.
application — Dumps the specified application information that was synchronized with the multi-
chassis peer.
Values dhcps, igmp, igmp-snooping, mc-ring, srrp, sub-mgmt, mld-snooping, all
detail — Displays detailed information.
alarm-deleted|local-deleted — Filters by entry type.
To Next Page
Loading...
