Ignore the call
A call is received:
• Press on the On-hook key on the permanent features keys panel.
• Your phone no longer rings but your caller still hears the ringing tone.
You can still answer the call after you have ignored it.
Switching between audio modes
During conversation, you can switch between different audio modes (handset, loudspeaker, hands-free
or headset, if connected) by pressing the loudspeaker/hands-free key until the desired audio mode is
displayed: . This feature depends on connected devices and the default device selected in the
phone configuration. If you have connected the same type of accessory via different connection methods
(for example, a headset to the jack connector, a headset to the USB connector and a Bluetooth ®
headset), the default device is used for audio switching. The key is lit when the loudspeaker or hands-
free mode is selected.
You are in conversation with the handset, you can switch between following audio modes by short
pressing on the loudspeaker/hands-free key:
You are in conversation with the headset (headset or headset+loudspeaker), you can switch between
following audio modes by short pressing on the loudspeaker/hands-free key:
You are in conversation with the headset and the handset is not hang-up, you can switch between
following audio modes by short pressing on the loudspeaker/hands-free key:
To switch the audio to the headset, you have to press the Off-hook key of the headset.
You are in conversation, you can switch to the loudspeaker by long pressing on the loudspeaker/hands-
free key (Group listening feature):
To Next Page
Loading...
