Modify the associated number
The associated number can be a phone set number, the voice mail number or the pager number.
• Reach the 'Menu' page.
• Settings My services Associate
• Enter your password.
• Apply
• Modify
• Select the new associated number.
o Enter the new associated number.
o Speed dial
The Tandem configuration
This configuration lets you group sets under a single phone number. Your set is then the main set and
the other sets, usually a DECT, a remote extension, a DeskPhone or softphone, are secondary sets.
Each set has its own directory number, but the tandem number is that of the main set. When you receive
a call, all sets ring simultaneously. When one of the sets answers, the other sets stop ringing. When all
the lines of the main set are busy, the secondary sets did not ring. A secondary set can still be called by
its own number, but in this case, the tandem function will no longer be taken into account. Most of the
functions are common to all sets, for example: forwarding, meet-me reminder, the various messages,
etc., while others are specific to each set, for example: individual directory, last number redial, out of
service, locking, etc. Tandem mode supports up to 4 secondary devices.
For more information regarding this configuration, contact the person in charge of your installation.
Create, modify or consult your interphony list (max. 10 numbers)
• Reach the 'Menu' page.
• Settings My services Interphony
• Enter your password.
• Select an entry.
• Follow the on-screen instructions.
Install a jack accessory (headset, hands-free, loudspeaker) (8078s, 8068s,
8058s, 8028s Premium DeskPhone)
Your phone is equipped with a 3.5 mm, 4 pole jack. If your device is not compatible, you can use a 3
pole to 4 pole jack adapter.
Install the accessory
By default, the audio jack of your telephone can be used to connect a headset, hands-free kit or
loudspeaker. A wideband headset can also be installed for optimized sound quality.
When you plug the jack accessory in the jack, a popup asks you for the type of accessory:
• Headset
• Handsfree
• Loudspeaker
If another headset is already connected (USB or Bluetooth® if available), a popup asks you to select
your preferred headset.
A specific icon is displayed in the status bar: .
To Next Page
Loading...
