Alcatel-Lucent 8078s - 7.9 Adjusting Display Contrast; 7.12 Programming Phone Keys

Programming your telephone
8AL90339ENADed01
81 /119
Adjusting the contrast of the display (8028s, 8018, 8008G, 8008)
• Reach the 'Menu' page.
• Settings Phone Contrast
• Decrease or increase the contrast of the display. You can use also the dedicated
function keys displayed on the screen.
•
•
Selecting the welcome page
This function is used to choose the page displayed by default on the telephone.
• Reach the 'Menu' page.
• Settings Phone Homepage
• Enter your password (if required) and apply.
• Select the default page (Menu, Perso, Info, Last page seen.
•
•
Selecting language
• Reach the 'Menu' page.
• Settings Phone Language
• Enter your password (if required) and apply.
• Select the language of your choice.
•
•
Programming keys for call numbers and functions (Perso page/F1 and F2
keys/Add-on keys)
123<>abc: If your set is not provided with a magnetic keyboard, use the alpha-numeric keyboard to
enter letters. Use the alpha-numeric keyboard key to switch between the numeric and alphabetic
keyboard. When in alphabetic mode, the LED corresponding to the key remains lit up.
Depending on your desk phone, you can program:
• Softkeys of the Perso page.
• Keys/softkeys of the add-on module.
• F1 and F2 keys.
• Programmable keys with LED and paper.
Led behavior may differ depending on the system configuration. For more information, contact
your installer or administrator.
If the key is not programmed yet:
• Select the key to program.
• Enter your password (if required) and apply.
• Use one of the following:
o Speed dial To program a number.
o Services To program a function.