Sending a text message to an internal contact
This feature depends on the system configuration. If necessary, contact your administrator.
123<>abc: If your set is not provided with a magnetic keyboard, use the alpha-numeric keyboard to
enter letters. Use the alpha-numeric keyboard key to switch between the numeric and alphabetic
keyboard. When in alphabetic mode, the LED corresponding to the key remains lit up.
•
• Text mail /New text message /New text messages
• Send
• Use one of the following:
o Enter the number of the terminal to receive the message.
o Enter the first letters of the name.
• Choose the type of message.
Sending predefined message
• Predefined msg
• Select a predefined message.
• Apply
Sending a message to complete
• To complete
• Select a predefined message to complete.
• Complete your message.
• Apply
Sending a new message
• To create (Msg to create)
• Write your message.
• Apply
Sending the previous message
• Previous msg
• Apply
Consulting text messages
You are notified of a new event when the message key is flashing.
• Number of messages received.
• New text message/ New text messages
• Read message (Read msg) Display name of sender, with date, time and ranking of message.
• Use one of the following:
o Scroll message (Scroll msg) Scroll through the messages.
o Next message (Next msg) Next message.
o Delete Delete messages.
o Recall Call back sender of message.
o Text answer (Answer txt) Answer with a text message.
o Terminate consultation.
To Next Page
Loading...
