Install a USB accessory (Headset, Handsfree, Loudspeaker)
• Connect the accessory to the USB connector.
• When you plug the accessory in the USB port, the USB accessory is automatically detected. If an
another accessory is already connected with the same function (USB, jack or Bluetooth® if
available), a popup asks you to select your preferred accessory to use for this function.
If you are using a Bluetooth ® headset provided with a Bluetooth ® USB dongle, you can connect the
headset to the USB connector. Use and connectability depend on the vendor of the headset.
: This icon is only available on the 8078s Premium DeskPhone.
Install a RJ9 headset (8008G/8008 DeskPhone)
You can connect a corded headset to your phone using the RJ9 connector behind the phone. Your
headset must be compatible with the connector or an adapter must be used. Some USB or jack
headsets can be used with a RJ9 adapter. Consult the list of accessories for compatible headsets: List of
accessories.
Manage connected devices
: This icon is only available on the 8078s Premium DeskPhone.
List of connected devices
• Or (long press) AudioHub
• Devices
• The list of connected devices is displayed. You can find information about the connector:
o : USB.
o : Jack.
o : Hands-free.
o : Handset.
If two devices are connected to the desk phone and have the same function, two icons are displayed in
the same line. The dark icon is the default device.
For example, in the following example, a USB headset and a jack headset are connected. The default
headset is the one connected to the jack connector.
To Next Page
Loading...
