• To return to the first contact, use one of the following.
o Select the incoming call icon.
o
o Unhook the handset.
Switching between calls (Broker call)
During a conversation, a second call is on hold.
Use one of the following:
• Select the call on hold icon from the conversation screen.
• Select the tab which is displaying the call on hold Retrieve
• Press the Back/Exit key to display the Perso page Select the call on hold.
You are in conversation with the second contact and the first one is on hold.
Transferring a call
• Calling a second person during a conversation The first call is on hold.
• You can transfer the call immediately or wait for your contact to answer before transferring the
call: Transfer
Transfer between two outside calls is not generally possible (depends on country concerned and system
configuration).
Three-way conference with internal and/or external contacts (conference)
• During a conversation, a second call is on hold.
• Conference (Confer) You are in conference mode.
Cancel conference and return to first contact (if conference is active)
• End conference (End conf)
Hang up on all participants (if conference is active)
• Hang up.
• You exit the conference.
After the conference, to leave your two contacts talking together
• Transfer
• Hang up.
View information about the other people in the conference
• Navigate between both call in progress tabs involved in the conference.
To Next Page
Loading...
