8AL90862USABed01
2.3 Charging your telephone battery
2.3.1 Charging the battery on a single charger
Put your phone on its suppo Plug the UB cable into the 5V socket of the desktop charger. Plug the other
end of the USB cable into the AC/DC adaptor. Plug the AC/DC adaptor into the mains power supply.
Green steady: the phone is on the charger (or connected to the USB cable) and the battery is fully
charged.
Red steady: the phone is on the charger and the battery is charging.
You can configure how the handset behaves when it is installed on the charger using the settings menu.
Refer to the chapter on configuring your telephone.
2.3.2 How to dock your phone with the USB cable
Plug the USB cable into the USB port of your phone. The other end of the USB cable
can be plugged into the AC/DC adaptor or into a computer USB port.
You can also charge your phone from any USB plug, such as a computer USB plug. However, the charging
time is longer than charging with the AC/DC adapter.
2.3.3 LED
Green steady: the phone is on the charger (or connected to the USB cable) and the battery is fully
charged.
Red steady: the phone is on the charger and the battery is charging.
Recharge your telephone battery regularly. The telephone can be on or off when recharging the battery. If
the telephone is to remain unused or out of its charger for several weeks, remove the battery and store it
separately.
The battery charging time is less than 3 hours. The charging time is longer if charging through the USB
plug from a device other than the AC/DC adapter.
To Next Page
Loading...
Need help?
General
