ALE-2/ALE-3 Basic DeskPhone User Manual 8AL91438ENABed01 17
Use the alpha-numeric dialpad to switch between the numeric and alphabetic dialpad.
Switch to the alphabetical dialpad.
Enter the first letter of your contact’s name.
The corresponding contacts will appear in a list. Entering more characters will narrow
the search until the matched name is displayed.
Use up-down navigation keys to select the contact you want to call.
Use one of the following:
Press the Dial key. Make the call with the active device: handset if unhooked, headset
if connected, otherwise in handsfree mode.
Press the OK key to make a call.
Press the Call soft key to start the call.
If defined in the phone settings, you can use these keys to initiate the call.
3.3.4 Calling from the call log
You can call back a contact from the call log.
From the homepage or the dialer:
Select the soft key to open call logs.
Use up-down navigation keys to select the contact you want to call.
Use one of the following:
Press the Dial key. Make the call with the active device: handset if unhooked, headset
if connected, otherwise in handsfree mode.
Press the OK key to make a call.
Press the Call soft key to start the call.
If you are using multiple SIP accounts on your phone, the call back is made with the SIP account displayed in the
call log.
3.3.5 Calling using your personal directory
You can unhook the handset or the headset to make a call with the handset or the headset, otherwise you make a
call in handsfree mode.
From the homepage or the dialer:
Select the soft key to open your local directory from the homepage or the dialer.
To Next Page
Loading...
