Alcatel-Lucent ALE-2 - Do not disturb (DND); Call Forward

ALE-2/ALE-3 Basic DeskPhone User Manual 8AL91438ENABed01 33
Transfer between two external calls depends on the regulations of countries concerned and the server
configuration.
3.23 Three-party conference
During a conversation, a second call is on hold.
Use one of the following methods:
Press the Conf key. You are in conference mode.
Conf
Press the soft key with the following label: Conf You are in conference mode.
3.23.1 End conf
You are in conference mode.
Use one of the following:
Press the On-Hook key. The conference is ended.
End
Press the soft key with the following label: End conf The conference is ended.
3.23.2 Leaving your two contacts talking together after the conference
You are in conference mode.
Use one of the following:
Press the Transfer key. The two participants remain on the call.
Transfer
Press the soft key with the following label: Transfer The two participants remain on
the call.
3.24 Six-party conference
You are in a three-party conference call.
Use one of the following methods:
Press the Hold key.
Hold
Press the soft key with the following label: Hold.
New →
or Call
Call a new participant by using the dialer and dialing by name from the call log or
directory.
You are in conversation with the new participant.
Join
The new participant is joining the conference call.
When the maximum of participants is reached, you will not be able to make a new call to add a new participant.