1.2 Installing your desk phone
1.2.1 Connecting your desk phone
Please read the safety instructions beforehand.
Firstly, connect the handset cord to the lower notch (4) if it is not correctly connected (your phone is usually
provided with the handset cord connected).
If your desk phone is not correctly configured, you can connect it to the network (1) ((2) is used to connect to your
PC). If your desk phone is not powered by PoE (Power over Ethernet), you have to connect the phone to the external
power supply which supports DC JACK connector (3). For more information, contact your administrator.
To Next Page
Loading...
