Alcatel-Lucent ALE-2 - Configuring the homepage format; Defining the voicemail number; Programmable keys

ALE-2/ALE-3 Basic DeskPhone User Manual 8AL91438ENABed01 41
Switch or
Enable or disable the silent mode: Silent mode.
The desk phone no longer rings, but the LED flashes continuously to signal an
incoming call.
or Save
Validate your choice.
End the procedure.
5.1.4 Configuring the beep mode
When the desk phone is in idle state:
Menu
Press the Menu soft key to access the Main Menu.
Basic Setting
Use up-down and "OK" navigation keys to select: Basic Setting.
Sound
Use up-down and "OK" navigation keys to select: Sound.
Ringing
Use up-down and "OK" navigation keys to select: Ringing.
Beep
Use up-down and "OK" navigation keys to select: Beep.
Switch or
• 0 Beep: A normal ring signals an incoming call.
• 1 Beep: A beep followed by the ring signals an incoming call.
• 3 Beeps: Three beeps followed by the ring signals an incoming call.
or Save
Validate your choice.
End the procedure.
5.1.5 Configuring the seat mode
Your desk phone supports the seat mode, which is a different ring mode. The seat mode allows your
administrator to switch the ringing onto the loudspeaker, the headset, or both. This feature can be configured on
the Web Based Management page.
5.2 Selecting a language
When the desk phone is in idle state:
Menu
Press the Menu soft key to access the Main Menu.
Basic Setting
Use up-down and "OK" navigation keys to select: Basic Setting.
Languages
Use up-down and "OK" navigation keys to select: Languages.
Switch or
Select the language of your choice.
or Save
Validate your choice.
End the procedure.