ALE-2/ALE-3 Basic DeskPhone User Manual 8AL91438ENABed01 46
• If the phone ringing is in your own pick-up group, select the programmed key: GrpPickup.
• If the phone ringing is not in your pick-up group, select the programmed key: DirectPickup.
5.10 Activating the headset mode
You can use a headset with your desk phone. If you want the headset to ring only when receiving an incoming
call, you must activate the headset mode.
Before using this feature, you must press the headset key to activate the headset feature. When the feature is
activated, the LED of the headset is on and shows a blue light.
When the desk phone is in idle state:
Connect the headset to the desk phone
Press the Headset key.
This icon is displayed on your desk phone screen:
5.11 Defining Time and Date format
When the desk phone is in idle state:
Press the Menu soft key to access the Main Menu.
Use up-down and "OK" navigation keys to select: Basic Setting.
Use up-down and "OK" navigation keys to select: Time & Date.
Date: use the left-right navigation keys to select a date format. There are 6 date
formats: YY-MM-DD, YYYY/MM/DD, YY/MM/DD, YYYY MM DD, YYYY-MM-DD, and
MM DD WW
Time: use the left-right navigation keys to select a time format. There are two time
formats: 12-hour clock and 24-hour clock.
To Next Page
Loading...
