EasyManua.ls Logo

Alcatel-Lucent H2 DeskPhone - Page 81

Alcatel-Lucent H2 DeskPhone
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
H2 DeskPhone
H2P DeskPhone
8AL90394ENAAed01 81 /111
Proxy Password
Enter the SIP proxy password.
Backup Proxy Server
Address
Enter the IP or FQDN address of the backup proxy server.
Backup Proxy Server
Port
Enter the backup proxy server port, default is 5060.
Basic Settings
Enable Auto Answering
Enables auto-answering. Incoming calls will be answered automatically after
the delay time.
Auto Answering Delay
Sets the delay for an incoming call before the system automatically answers
it.
Call Forward
Unconditional
Enables unconditional call forwarding. All incoming calls will be forwarded to
the number specified in the next field.
Call Forward Number for
Unconditional
Sets the number for unconditional call forwarding.
Call Forward on Busy
Enables call forwarding on busy when the telephone is busy. Any incoming
call will be forwarded to the number specified in the next field.
Call Forward Number for
Busy
Sets the number for call forwarding on busy .
Call Forward on No
Answer
Enables call forwarding on no answer. When an incoming call is not
answered within the configured delay time, the call will be forwarded to the
number specified in the next field.
Call Forward Number for
No Answer
Sets the number for call forwarding on no answer.
Call Forward Delay for
No Answer
Sets the delay time for an unanswered call before being forwarded.
Transfer Timeout
Sets the timeout for the call transfer process.
Conference Type
Sets the type of call conference, Local=set up call conference by the device
itself, maximum supports two remote parties, Server=set up call conference
by dialing to a conference room on the server
Server Conference
Number
Sets the conference room number when the conference type is set to be
Server
Subscribe For Voice
Message
Enables the device to subscribe to a voice message waiting notification. If
enabled, the device will receive notification from the server if there is voice
message waiting on the server.
Voice Message Number
Sets the number for retrieving voice messages.
Voice Message
Subscribe Period
Sets the interval for voice message notification subscription.
Enable Hotline
Enables hotline configuration. The device will dial the specific number

Table of Contents

Related product manuals