Alcatel-Lucent IP - Page 16

IP/V24 WALLBOARD
2 x 16 digits
TECHNICAL
MANUAL
D0503002
23/01/2008
Page 16/18
5. Enter the new settings and validate. To apply the new settings, the wallboard will be reset
a few seconds after validation.
Internet Explorer example:
Address :
Wallboard address (default: 0).
Baud rate :
Output rate of the serial connection (default: 9,600).
Buzzer duration :
Duration of the buzzer in seconds (default: 3).
IP address :
IP address (default: 10.0.0.88).
Net mask :
Sub-network mask (default: 255.0.0.0).
Gateway :
Gateway address. To be filled in to access the settings from another
network (default: blank).