OmniSwitch OS6860/OS6900/OS10K Troubleshooting Guide Part No.032996-00 Rev.A
AOS Release 7.X and 8.X January 2015
Alcatel-Lucent Page 135 of 148
Sent : 4,
Recv : 51,
Drop : 0
No Request RPL Block PDUs
Sent : 0,
Recv : 1170,
Drop : 0
Invalid R-APS PDUs
Recv : 0
Below is the command to view the status for a particular port:
-> show erp port <chassis/slot/port>
Below is an example:
-> show erp port 1/1/1
Ring-Id : 1
Ring Port Status : forwarding,
Ring Port Type : rpl,
Ethoam Event : disabled,
Remote-endpoint Id : none
Troubleshooting Commands
Commands will be provided accordingly from Support/Engineering, on a "case-to-case" basis.
Debug command
-> debug qos internal "slot 1 list 1 verbose" | grep ERP
To Next Page
Loading...
