OmniSwitch OS6860/OS6900/OS10K Troubleshooting Guide Part No.032996-00 Rev.A
AOS Release 7.X and 8.X January 2015
Alcatel-Lucent Page 137 of 148
SystemId : e8e7.32b3.4ccd, SrcId : 0x34ccd, SystemName : OS6860
SAP Bind MCast
ServiceId Adm Oper Stats Count Count Isid BVlan Mode (T/R)
-----------+----+----+-----+-------+-------+---------+-----+--------------
2000 Up Up N 2 1 12000 4003 Headend (0/0)
3000 Up Up N 1 1 13000 4003 Headend (0/0)
Total Services: 2
The service ID is a unique number that identifies a specific SPB service. Information associated with the
service ID is displayed.
-> show service spb 3000
SPB Service Detailed Info
Service Id : 3000, Description : ,
ISID : 13000, BVlan : 4003,
Multicast-Mode : Headend, TX/Rx Bits : 0/0,
Admin Status : Up, Oper Status : Up,
Stats Status : No, Vlan Translation : No,
Service Type : SPB, Allocation Type : Static,
MTU : 9194, Def Mesh VC Id : 3000,
SAP Count : 1, SDP Bind Count : 1,
Ingress Pkts : 0, Ingress Bytes : 0,
Egress Pkts : 0, Egress Bytes : 0,
Mgmt Change : 03/07/2014 06:23:28, Status Change : 03/07/2014 06:23:28
-> show service isid 13000
SPB Service Detailed Info
Service Id : 3000, Description : ,
ISID : 13000, BVlan : 4003,
Multicast-Mode : Headend, TX/Rx Bits : 0/0,
Admin Status : Up, Oper Status : Up,
Stats Status : No, Vlan Translation : No,
Service Type : SPB, Allocation Type : Static,
MTU : 9194, Def Mesh VC Id : 3000,
SAP Count : 1, SDP Bind Count : 1,
Ingress Pkts : 0, Ingress Bytes : 0,
Egress Pkts : 0, Egress Bytes : 0,
Mgmt Change : 03/07/2014 06:23:28, Status Change : 03/07/2014 06:23:28
To display the access (customer-facing) port configuration for the bridge. By default all service access ports
are displayed if a port or link aggregate number is not specified:
-> show service access
Port Link SAP SAP Vlan
Id Status Type Count Xlation L2Profile Description
---------+------+-------+-------+-------+--------------------------------+-----------------------
----------
2/1/10 Down Manual 1 N def-access-profile
2/1/23 Down Manual 0 N def-access-profile
2/1/26 Up Manual 2 N def-access-profile
Total Access Ports: 3
A SAP is a type of virtual port that is associated with a SPB service. To determine the SAP configuration
for a specific service, use the show service spb ports command to view the virtual ports associated with a
specific service.
For example:
-> show service spb 3000 ports
Legend: (*) dyn unicast object (+) remote mcast object (#) local mcast object
SPB Service 3000 Info
Admin : Up, Oper : Up, Stats : N, Mtu : 9194, VlanXlation : N,
ISID : 13000, BVlan : 4003, MCast-Mode : Headend, Tx/Rx : 0/0
Sap Trusted:Priority/ Sap Description /
Identifier Adm Oper Stats Sdp SystemId:BVlan Intf Sdp SystemName
----------------------+----+----+-----+--------------------+--------+----------------------------
----