Alcatel-Lucent OmniSwitch 10K - Page 47

OmniSwitch OS6860/OS6900/OS10K Troubleshooting Guide Part No.032996-00 Rev.A
AOS Release 7.X and 8.X January 2015
Alcatel-Lucent Page 47 of 148
Troubleshooting in bShell
Verify a VLAN's Spanning Tree Group (STG):
BCM.0> dump chg vlan 2
VLAN.ipipe0[2]:
<VLAN_PROFILE_PTR=1,VALID=1,STG=5,PORT_BITMAP_W1=0xc00000,PORT_BITMAP_W0=0x5f,PORT_BITMAP=0x00c00
0000000005f,ING_PORT_BITMAP_W1=0xc00000,ING_PORT_BITMAP_W0=0x5f,ING_PORT_BITMAP=0x00c000000000005
f,EVEN_PARITY_1=1,EVEN_PARITY_0=1,ENABLE_IGMP_MLD_SNOOPING=1,>
BCM.0>
Convert the port bitmat to readable format:
BCM.0> pbmp 0x5f
0x000000000000000000000000000000000000000000000000000000000000005f ==>
cpu,ge0-ge4
BCM.0>
OS6860-> show vlan 2 members
port type status
----------+-----------+---------------
1/1/1 default forwarding
1/1/2 default inactive
1/1/3 default blocking
1/1/4 default inactive
1/1/5 default inactive
Verify the STG state in hardware to check if the port is mapped and configured correctly:
BCM.0> stg stp 5
STG 5:
Block: ge1-ge28,xe
Forward: ge0,hg
BCM.0>
OS6860-> show spantree ports blocking
Vlan Port Oper Status Path Cost Role Note
-----+-------+------------+---------+-------+---------
2 1/1/3 BLK 4 ALT
OS6860-> show spantree ports forwarding
Vlan Port Oper Status Path Cost Role Note
-----+-------+------------+---------+-------+---------
2 1/1/1 FORW 4 ROOT