OmniSwitch OS6860/OS6900/OS10K Troubleshooting Guide Part No.032996-00 Rev.A
AOS Release 7.X and 8.X January 2015
Alcatel-Lucent Page 81 of 148
FP_POLICY_TABLE.ipipe0[264]:
<Y_CHANGE_PKT_PRI=5,Y_CHANGE_DSCP=3,Y_CHANGE_COS_OR_INT_PRI=5,R_CHANGE_PKT_PRI=5,R_CHANGE_DSCP=3,
R_CHANGE_COS_OR_INT_PRI=5,G_CHANGE_PKT_PRI=5,G_CHANGE_DSCP_TOS=3,G_CHANGE_COS_OR_INT_PRI=5>
FP_POLICY_TABLE.ipipe0[265]:
<Y_CHANGE_PKT_PRI=5,Y_CHANGE_DSCP=3,Y_CHANGE_COS_OR_INT_PRI=5,R_CHANGE_PKT_PRI=5,R_CHANGE_DSCP=3,
R_CHANGE_COS_OR_INT_PRI=5,G_CHANGE_PKT_PRI=5,G_CHANGE_DSCP_TOS=3,G_CHANGE_COS_OR_INT_PRI=5>
...
Display meters (rate limiting) configured in TCAM (the entry number does NOT correspond to the TCAM
column from, it corresponds to meter configured in FP_POLICY_TABLE):
BCM.0> d chg fp_meter_table
FP_METER_TABLE.ipipe0[0]: <REFRESHCOUNT=2,METER_GRAN=3,BUCKETSIZE=5,BUCKETCOUNT=0x50000>
FP_METER_TABLE.ipipe0[1]: <REFRESHCOUNT=2,METER_GRAN=3,BUCKETSIZE=5,BUCKETCOUNT=0x50000>
FP_METER_TABLE.ipipe0[2]: <BUCKETSIZE=1,BUCKETCOUNT=0xffff>
FP_METER_TABLE.ipipe0[3]: <BUCKETSIZE=1,BUCKETCOUNT=0x3fffffff>
Display counter configured in TCAM (the entry number does NOT correspond to the TCAM column from, it
corresponds to counter configured in FP_POLICY_TABLE):
BCM.0> d chg fp_counter_table
FP_COUNTER_TABLE.ipipe0[399]:
<PACKET_COUNTER=0x1bd48e,BYTE_COUNTER=0x1ff1f2b9>
FP_COUNTER_TABLE.ipipe0[1548]: <PACKET_COUNTER=0x1a5e,BYTE_COUNTER=0xd2f00>
To Next Page
Loading...
