Alcatel-Lucent OmniSwitch 6350 - Omniswitch 6350 LED Status

OmniSwitch 6350 Chassis and Hardware Components OmniSwitch 6350 LED Status
OmniSwitch 6350 Hardware Users Guide April 2017 page 3-21
OmniSwitch 6350 LED Status
LED State Description
OK1 Solid Green
Blinking Green
Solid Amber
The switch has passed hardware diagnostic tests and the
system software is operational
Normal diagnostics and/or Remote Config Load in progress
System fan failure or temperature threshold exceeded
PRI Solid Green
Solid Amber
Off
Switch is idle.
PWR Solid Green
Solid Amber
Off
P/S Normal Operation
P/S Present and Bad
P/S Not Present.
10/100/1000 Ports Solid Green
Blinking Green
Solid Amber
Blinking Amber
Off
Valid L ink
Transmitting or receiving packets in a link up state for non-
PoE
Valid PoE Link
Transmitting or receiving packets in a link up state for PoE
No Link Detected
SFP Ports Solid Green
Blinking Green
Off
Valid L ink
Transmitting or receiving packets in a link up state
No Link Detected