Managing OmniSwitch 6350 Stacks Slot Numbering
OmniSwitch 6350 Hardware Users Guide April 2017 page 7-19
Slot Numbering
For a stack of OmniSwitch 6350 switches to operate as a virtual chassis, each module in the stack must be
assigned a unique slot number. To view the current slot assignments for a stack, use the show ni or show
module commands. The slot number is also displayed on the front panel of each switch by the LED
located on the left side of the chassis (refer to “OmniSwitch 6350 LED Status” on page 3-21 for more
information).
There are two ways stacking modules are assigned slot numbers:
• Dynamic slot number assignment by the system software
• Manual slot number assignment by the user
To Next Page
Loading...
