Managing Power over Ethernet (PoE) Power over Ethernet Specifications
OmniSwitch 6350 Hardware Users Guide April 2017 page 6-3
Power over Ethernet Specifications
The table below lists general specifications for Alcatel-Lucent’s Power over Ethernet support. For more
detailed power supply and Power Source Equipment (PSE) specifications, refer to Chapter 3,
“OmniSwitch 6350 Chassis and Hardware Components.”
IEEE Standards supported
IEEE 802.3at
Default PoE administrative status Enabled
Default PoE operational status Enabled
Models supporting PoE OS6350-P10, OS6350-P24, OS6350-P48
Cable distances supported 100 meters (approx.)
PoE-capable ports per switch 8 (OS6350-P10)
24 (OS6350-P24)
48 (OS6350-P48)
Default amount of inline power available 31000 milliwatts
Range of inline power allowed 3000 - 31000 milliwatts
PoE Power Available OmniSwitch 6350-P10: ~ 120W
OmniSwitch 6350-P24: ~ 380W
OmniSwitch 6350-P48: ~ 780W
To Next Page
Loading...
