Need help?Do you have a question about the Alcatel-Lucent OmniSwitch 6450 and is the answer not in the manual?
General| Model | OmniSwitch 6450 |
|---|---|
| Product Series | OmniSwitch |
| Layer | Layer 3 |
| Form Factor | Rack-mountable |
| Ports | 48 x 10/100/1000Base-T |
| VLAN Support | Yes |
| Management | Web-based, CLI, SNMP |
| Type | Managed Switch |
| Uplink Ports | 4 x SFP (mini-GBIC) |
| Power over Ethernet (PoE) | IEEE 802.3af/at (PoE/PoE+) available on some models |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
Lists the OmniSwitch 6450 models covered in this hardware users guide.
Explains the structure of the users guide and the overall documentation suite.
Lists other relevant OmniSwitch manuals and provides support contact information.
Details chassis configurations, port types, and key features like combo ports.
Provides an overview of the OmniSwitch 6450-10, its components, and specifications.
Details the OmniSwitch 6450-24, including its front/rear panels and specifications.
Details the OmniSwitch 6450-P48, its components, and technical specifications.
Explains LED indicators, optional expansion modules, and power supply options.
Covers AC power cords, console port, pinouts, and system conditions.
Provides guidelines for switch placement and airflow for optimal operation.
Details procedures for table-mounting and rack-mounting the switches.
Describes how to install and connect external PoE power supplies.
Explains switch boot sequence, LED status, and chassis monitoring commands.
Covers console port connection and modifying serial communication settings.
Lists PoE standards, capabilities, and basic configuration parameters.
Details setting port power limits, switch power, and port priority levels.
Explains stack basics, switch roles, and primary/secondary management selection.
Covers slot assignment, pass-through mode, recovery, and stack cabling.
Details procedures for reloading switches, synchronizing stacks, and monitoring.
Includes CE Mark, China RoHS, WEEE, and industry standards compliance.
Provides crucial safety warnings for installation, operation, and handling.
To Next Page
