Alcatel-Lucent OmniSwitch 6450 - General Installation and Airflow Recommendations

General Installation Recommendations Mounting OmniSwitch 6450 Switches
page 3-2 OmniSwitch 6450 Hardware Users Guide July 2012
General Installation Recommendations
Airflow Recommendations
To ensure proper airflow, be sure that your switch is placed in a well-ventilated area and provide minimum
recommended clearance at the front, back and sides of the switch, as shown below. Restricted airflow can
cause your switch to overheat, which can lead to switch failure.
24- and 48-Port Chassis Types
6 inches minimum at
front of chassis.
2 inches minimum at
left and right sides.
}
}
6 inches minimum at
rear of chassis.