Alcatel-Lucent OmniSwitch 6450 - Omniswitch 6450-P24; Major Components; Front Panel

OmniSwitch 6450 Chassis and Hardware Components OmniSwitch 6450-P24
OmniSwitch 6450 Hardware Users Guide July 2012 page 2-11
OmniSwitch 6450-P24
Major Components
Front Panel
OmniSwitch 6450-10 Front Panel
Refer to “OmniSwitch 6450 LED Status” on page 2-23 for LED status information.
System status LEDs Internal AC Power Supply
(24) Non-combo 10/100/1000Base-T 802.3at PoE
ports
Backup Power Supply (BPS) Connector
(2) Non-combo SFP/SFP+ ports Console port (RJ-45)
Expansion Module USB port (USB 2.0)
Stacking LED
Item Description
A
Stacking LED
Displays the chassis stack ID.
B
Console Port
RS-232 console port with an RJ-45 connector. Provides access to the CLI for configuration and
management.
C
System Status LEDs
Provides status on hardware, software, and power.
D
10/100/1000BaseT RJ-45 PoE Ports
10/100/1000BaseT non-combo ports. Odd-numbered ports are on top row, even-numbered ports
are on bottom row.
E
Rear Status LEDs
Displays link status for expansion module ports.
F
USB Port
High speed USB 2.0 port.
G
SFP/SFP+ Ports
Two SFP/SFP+ ports to be used for uplinks.
CB
A
D
E
F
G