Alcatel-Lucent OmniSwitch 6450 - OmniSwitch 6450 Model Details

OmniSwitch 6450-10 OmniSwitch 6450 Chassis and Hardware Components
page 2-2 OmniSwitch 6450 Hardware Users Guide July 2012
OmniSwitch 6450-10
Major Components
Front Panel
OmniSwitch 6450-10 Front Panel
Refer to “OmniSwitch 6450 LED Status” on page 2-23 for LED status information.
System status LEDs Internal AC Power Supply
(8) Non-combo 10/100/1000Base-T ports Console port (RJ-45)
(2) Non-combo 100/1000BaseX ports USB port (USB 2.0)
(2) Combo 10/100/1000Base-T or
100/1000BaseX ports
Fanless design
Item Description
A
System Status LEDs
Provides status on hardware, software, and power.
B
Console Port
RS-232 console port with an RJ-45 connector. Provides access to the CLI for configuration and
management.
C
10/100/1000BaseT RJ-45 Ports
10/100/1000BaseT non-combo ports. Odd-numbered ports are on top row, even-numbered ports
are on bottom row.
D
10/100/1000BaseT or 100/1000BaseX SFP Combo Ports
Two 10/100/1000BaseT or SFP combo ports for various supported SFP transceivers.
E
SFP Uplink Ports
Two SFP ports to be used for uplinks.
F
USB Port
High speed USB 2.0 port.
G
Push Button
When pushed, all LEDs will turn off and the LED of the Stack ID will remain lit. (Applies to 24-
and 48-port switches.)
OS6450-10
9
USB12/STK B11/STK B109
Console
OK PRI PWR STK
12 34 56 78 9 10 11 12
A
C
D
E
F
G
B