Mounting OS6855-14 and OS6855-U10 Switches Table-Mounting OS6855-14 and OS6855-U10 Switches
OmniSwitch 6855 Series Hardware Users Guide March 2009 page 4-19
Redundant Chassis Power with PoE (OS6855-14 only)
For redundant chassis power with PoE configurations, attach two additional mounting brackets to the rear
portion of the second power supply tray.
15 If preferred, mount the complete switch assembly to the table by inserting attachment screws (not
provided) through the flat portion of the mounting brackets and into the mounting surface. Do not over-
tighten. Otherwise, the switch/power supply tray assembly may simply be placed on the table surface
without attachment screws.
To Next Page
Loading...
