Alcatel-Lucent OmniSwitch 6855-24 - Viewing Poe Power Supply Status

Viewing PoE Power Supply Status Installing and Managing Power over Ethernet (PoE)
page 6-4 OmniSwitch 6855 Series Hardware Users Guide March 2009
Viewing PoE Power Supply Status
To view the current status of power supplies installed, use the show power command, as shown below:
-> show power
Slot PS Wattage Type Status Location
----+----+---------+------+-----------+----------
1 1 40 AC UP External
1 2 40 AC UP External
1 3 66 AC UP External
1 4 66 AC UP External
For detailed information on the show power command output, refer to the CLI Command Reference
Guide.