Chapter 1 Presentation of the attendant set
1-8 3BA 19875 ENAA - Ed. 02 - April 2000 - Alcatel 4035 - Attendant set
1-5-3-3 Function key SK3
• With the label «OnHold» displayed
This function is used to put the correspondent on hold until retrieved later.
• With the label «Transf» displayed
In enquiry call position, this function is used to transfer the first correspondent to the second.
• With the label «CampOn» displayed
This function is used to retrieve the correspondent routed.
• With the label «Endial» displayed
This function indicates to the system that the external numbering, whose format is unknown, has
terminated and is complete.
1-5-3-4 Function key SK4
• With the label «Fwd» displayed
This function is used to make a call directly on the called user’s forwarding destination set.
• With the label «Intern» displayed
This function is used to connect to the call to a user who has carried out an «attendant group
call».
1-5-3-5 Function key SK5
• With the label «Releas» displayed
In ordinary and enquiry call position, this function is used to release the communication in progress.
• With the label «Next» displayed
This function is used to connect to the call (internal/external) with the highest priority. The priority
order is defined at system management level.
To Next Page
Loading...
