Alcatel 4035 - 2-2-2 Forwarding between attendants

Attendant set facilities
3BA 19875 ENAA - Ed. 02 - April 2000 - Alcatel 4035 - Attendant set 2-35
▼ Routing with chained extend
Routing with chained extend allows the attendant to route a external communication to an internal
user set. This communication will call-back on the attendant set when this user of this set on-hooks.
In this way, the attendant can route the same call successively to several user sets.
▼ Routing with charged extend
During the routing of an external o/g communication to an internal user, charged extend activates
call-back to the attendant set on internal set on-hook. Answering the call-back displays the identity
of the set and the number of charge units charged to this set.
▼ Routing with extend and camped-on release
During the routing of an external communication to a busy internal set, the attendant can put the
call in the waiting queue with camp-on release.
When the internal user on-hooks, the set is not rung, but the external communication returns on
call-back to the attendant set. The attendant can then route it to the called user.
▼ Decimal or DTMF numbering transparency
Numbering transparency is used to send additional numbering on the line to the remote
correspondent. This numbering can be decimal or DTMF type.
▼ Cut-off or flashing
This facility sends a calibrated cut-off or flashing on the line to call-back, at the remote end, a
numbering register or translator before sending numbering in transparency mode.
▼ Temporary suppression of automatic transfer
When the «Automatic transfer» facility is validated, the attendant can use this possibility to
disable temporarily the automatic transfer so that, for example, the communication can be routed.
2-2-2 Forwarding between attendants
▼ Implementation
The attendant is in conversation with a correspondent:
Trace
Status
ReleasOnHold
Bundle