Alcatel 4035 - Attendant Set in Plugged In Position and Idle; Attendant Set in Unplugged Position; During Communications Processing; Ordinary or Enquiry Call to an Internal Set

Chapter 1 Presentation of the attendant set
1-10 3BA 19875 ENAA - Ed. 02 - April 2000 - Alcatel 4035 - Attendant set
1-7-1 Attendant set in «plugged in» position and idle
The screen shows the number of normal waiting calls and urgent waiting calls.
Urgent waiting calls are calls waiting longer than 30 seconds. They concern both circuits and
sets that are routed, calling or being called back or on ordinary hold.
In the event of no reply to waiting calls after a programmable threshold, a specially cadenced
ringing is sent and followed by display «Waiting calls», before the screen shows «Operator
absent».
To return to operational mode, «unplug» and then «plug in» the attendant set
(see § 3-1-1) .
1-7-2 Attendant set in «unplugged» position
The screen shows the status of the group, which can be:
- Night service
or
- Day service
or
- Forward 1
or
- Forward 2.
Regardless of the service displayed, the attendant set is inhibited. Only the command for changing
to «plugged in» position
(see § 3-1-1) can be activated.
1-7-3 During communications processing
The screen completes the information provided by the labels and, at all times, displays information
useful for processing the call.
1-7-3-1 Ordinary or enquiry call to an internal set
The number of the called set is displayed as the digits are dialled.
After numbering, the screen shows the following information (from left to right):
a. Set status
• Free
The set is free and automatically placed in «RESERVED» status.
•Ringing
The set is rung following camp-on ringing (press the «Ring» dynamic key).