Attendant set facilities
3BA 19875 ENAA - Ed. 02 - April 2000 - Alcatel 4035 - Attendant set 2-43
2-2-8 Transmission of a calibrated cut-off (flashing)
Reminder: This facility is not taken in account on an ISDN trunk group.
▼ Implementation
This facility lets the attendant activate at the remote PBX end:
- call-back by a register for acceptance of the numbering by a suffix,
- a service operation (remote attendant intervention).
The attendant carries out an o/g call:
- by prefix or access code,
- by abbreviated dialling,
- by programmed key.
After the attendant has entered conversation mode with the remote set, the calibrated cut-off can
be used to call a DTMF numbering translator.
Pressing the «SERVICE» fixed key activates the associated pictogram and displays
the following screen:
The attendant presses the « » key to move onto the second screen:
On pressing the «TBR» key, a calibrated pulse is sent to the remote equipment. This equipment
sends a tone inviting the attendant to continue numbering.
Pressing this key results in exit from the «Service» facility.
SERVICE
DTMF
Charge
OnHook
Chain
Conv correspondent
FwdOp
TBR
TrfOff
Pulse
Conv correspondent
To Next Page
Loading...
