Alcatel XP1050 - Page 49

49
10.6.2. Recording Time
You can set the maximum length of the recording time of the incoming
messages.
1. Press MENU on the handset in idle mode.
2. Press
or to select Answering sys, then press SELECT.
3. Press
or to select Ans sys setup, then press SELECT.
4. Press
or to select Recording time, then press SELECT.
5. Press
or to select from 3 minutes, 2 minutes, or 1 minute, then
press SELECT to save. You hear a confirmation tone.
10.6.3. Call Screening
When the answering machine is set to ON and when there is an incoming
message, the base will start call screening automatically after the preset
numbers of rings of answer delay, also Press SCREEN to screen the call on
your handset and the screen displays the calling number display information.
At any time if you want to pick up the call, you can press
or on the handset
and the message recording will be stopped automatically. If the answering
machine is in the process of recording, the message already stored will be
saved.
Call Screening through the handset:
1. Press MENU on the handset in idle mode.
2. Use
or to select Answering sys, then press SELECT.
3. Use
or to select Ans sys setup, then press SELECT twice to select
Call screening.
4. Press
or to select between On and Off, then press SET to save. You
hear a confirmation tone.
Call Screening through the base:
During message recording, press
repeatedly to turn call screening
on and off for this call. Press
on the telephone base to adjust the
message volume.
During call screening, press on the telephone base to turn off the
call screening.
If the call screening is off and the answering machine has answered a call, press
or UP to turn on the call screening.
10.6.4. Activate Remote Access
You can access the answering machine remotely by dialling your fixed line
telephone number from any touch-tone telephone.
Your phone lets you check your messages, or otherwise operate your answering