www.aleratec.com
30
Using the HDD Copy Cruiser High-Speed WL
Main Menu
Setup - Erase Master
This function controls whether the hard disk drive inserted into the Source bay may
be altered by an overwrite or Secure Erase.
1. In the Setup menu, use the arrow buttons (or) to select “Erase Master”.
The following screen will be displayed.
2. Press OK to select. Use the arrow buttons to scroll between Enable or Disable
options.
3. Press OK to Enable or Disable the erasing of the master disc.
ESC
OK
[ 6. Setup ]
3. Erase Master
ESC
OK
6.3 Erase Master
Enable
ESC
OK
6.3 Erase Master
Disable
To Next Page
Loading...
