www.aleratec.com
29
Using the HDD Copy Cruiser High-Speed WL
Main Menu
Setup - Copy Area-Continued
6. The following information will be displayed.
Setup - Skip Error
This function will set the duplicator to be able to overwrite the source drive when
preforming any overwrite function.
1. In the Setup menu, use the arrow buttons (or) to select “Skip Error”.
The following screen will be displayed. Press OK to select.
2. The following information will be displayed.
ESC
OK
[ 6. Setup ]
2. Skip Error
ESC
OK
[ Copy Area ]
Percentage (%)
ESC
OK
[ Skip Error ]
0
To Next Page
Loading...
