87
CHAPTER 6: APPENDICES
6.0 APPENDIX 1: SPECIFICATIONS
Internal Memory
Song Memory: 20
Locate Points (per song): 20 (with user-variable names)
# of Preset Locate Names: 16 (user configurable)
Song Contents: 20 Locate points and their names,
Auto Punch on/off and punch points,
Loop on/off and loop points, Tape
Offset on/off and offset type and
amount, Track Delay on/off and
amounts, Pitch Mode and value, Ext
Sync on/off and sources (locate
reference and clock source), Gen Sync
on/off and types, Tempo Map, Song
Start, Song Name and SMPTE Start
Offset
Memory Backup: To ADAT (TOC – “table of contents”)
using Save Setup To Tape; or to MIDI
(sys/ex) using MIDI/Util 2: Dump
Sysex
Remote/Sync
Remote Control Connectors: Two 1/4" phone jacks (Transport
Remote Control and/or Locate/Play
footswitch jack, and Transport Remote
Control and/or Punch In/Out
footswitch jack)
User Remote Functions
Accessible (and available
on the LRC): Play, Stop, Fast Forward, Rewind,
Record, Locate 0, Locate 1, Locate 2, Set
Locate, Auto 2>1 (Loop), Auto Play,
Auto Input and All Input
Sync Connector: One 9 pin D-Sub connector (Sync Out)
Sync Capability: Automatic Master Syncing of up to 16
ADATs (128 tracks)
Internal Sample Clock: 48 KHz nominal. User variable from
50.8 to 40.4 KHz (+1, -3 semitones).
44.1 KHz = -147 cents
Sync Generation: MIDI Time-Code, SMPTE (all formats),
MIDI-Clock (w. Song-position Pointer),
and 48 KHz word clock