EasyManuals Logo

Alesis MASTERLINK ML-9600 Reference Manual

Alesis MASTERLINK ML-9600
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
Chapter 6
ALESIS ML-9600 REFERENCE MANUAL 39
6.3D FINALIZING
The last stage is the finalizing stage, where the CD drive "closes" the disc and writes the final Table Of
Contents to the disc. This process takes about 30 seconds to complete. After this finalization process,
the disc will no longer be able to accept new data; it becomes a "read-only" disc.
Once the disc has successfully been finalized, the tray will eject and the display will indicate
"successful", as shown in Figure 6.3.1.
Figure 6.3.1
Successful Red Book Creation
6.4 CD24 DISC SPECIFICS
One of the advantages to creating a CD24 disc is that the Track names are preserved when the disc is
recorded, and displayed when a disc is inserted and played. However, due to the limitations of the
ISO-9660 disc format, Track names on a CD24 are always converted to upper-case at recording time.
This will not affect the names assigned to Tracks in the playlist.
If a playlist contains two or more Tracks that, after being converted to upper-case, end up having the
same name, the MasterLink will automatically change the names of the files being recorded to the CD.
The last two characters of the Track name will be replaced by 01, 02, 03 etc., depending on the order of
the Track in the playlist.
For example, if the second, third, and seventh Tracks in a playlist are all named "Stairway", they will
end up on the CD24 as "STAIRWAY", "STAIRW01", and "STAIRW02".

Table of Contents

Other manuals for Alesis MASTERLINK ML-9600

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alesis MASTERLINK ML-9600 and is the answer not in the manual?

Alesis MASTERLINK ML-9600 Specifications

Audio Specifications IconAudio Specifications
ADC24-bit 128X oversampling
DAC24-bit 128X oversampling
Sample rates supported44.1kHz, 48kHz, 88.2kHz, 96kHz
Word lengths supported16-, 20-, and 24-bit
Analog I/O IconAnalog I/O
Frequency response at 44.1kHz/48kHz20Hz – 20kHz +0dB, -0.3dB
THD+N at 44.1kHz/48kHz<0.002% @1kHz, -1dBFS
Signal-to-noise ratio at 44.1kHz/48kHz113dB, A-weighted
Digital I/O IconDigital I/O
Supported protocols type IIEC 958
Supported protocols balancedAES/EBU
Supported protocols coaxialCoaxial
Weight and Dimensions IconWeight and Dimensions
Height3.5"/2U
Width17"
Depth11"

Related product manuals